How to reserve static IP address for your surveillance DVR ( D-link routers)

The Solution - Assign a Static IP Address, IP Reservation:

Your Dlink router can be configured to reserve and always assign a certain IP address to your DVR. This is known as a static IP address. Follow the below instructions to reserve static IP address for your surveillance DVR.

1. Open your D-Link router's control panel by going to the IP address http://192.168.0.1/ in a web browser. You will be prompt for a password. If you did not setup a password on your router, the dlink default password is blank. Enter admin for the username and leave the password blank
2. Afteryou are logged into your router, 1) click on the "Home" tab, then 2) click on the "DHCP" button. This will display the DHCP server screen as seen below: 
   
   
3. On the DHCP Server screen, use the screen shot below as a reference and:
   1. Locate the IP address of your DVR (you most likely previsouly noted this from a different set of instructions. If not, you can also identify your DVR by looking at the MAC address. In this example, our DVR is the one with the IP address ending in .104
   2. Choose the MAC address of your DVR from the DHCP client dropdown box and press the Clone button. This will populate the MAC Address and DHCP Client fields.
   3. Select the enabled radio button
   4. Choose a name for your DVR. This can be anything that you choose and is only used by you to indentify your DVR on the network while in the D-Link control panel.
   5. Press the Apply button.
      
      
4. After your router restarts and your screen refreshes, the static IP settings you made will be saved in the Status DHCP Client List as seen below.
   
   

That IP address is now permanently reserved for your IP camera or network DVR unless you remove that setting.

D-LINK TECH SUPPORT :

 We as an experienced team of D-Link support specialists provide even better services with issue fixing and solution providing to various problems without customers wasting their time by searching a shop outside.
Our D-Link technicians have many years of experience and possess top-notch knowledge about D-Link routers and all other D-Link networking products such that they can resolve almost all bugs through remote access technology.

CALL US AT OUR TOLL FREE NUMBER FOR AUSTRALIA:

1800987893.

YOU CAN VISIT OUR WEBSITE FOR MORE INFO:

http://www.support-router.com/au/d-link-support/

Enable mac filtering on D-link Routers.

There might be many reasons which would make to enable MAC filtering in your Wi-Fi router. Situations like lot of users know your wifi password and you to do some important work for time being and the whole speed is distributed. Also, to get rid of hackers MAC filtering is much better option.This guide is based on D-link DSL 2750U router but it will work with all the D-link routers having Firmware Version:IN_1.02. Also, even if the firmwares are different the steps are probably more less same.

This is how you can enable mac filtering on dlink Router

First of all make sure you are connected to your router either wirelessly or through LAN (Local area Network).
1. Enter 192.168.1.1 in your browser URL. A window will open asking username and password.

Mostly, the default username is admin and password is also admin. If you have not changed it just enter admin in the password but if you changed it then enter the one you have changed.
Learn: How to Change Dlink default admin password? call at 1800 987 893

2. After entering the password click on Login and new window will open.

Click on the Advanced Tab. Another window with option of MAC filtering will come.

3. Click on Mac Filtering button under ADVANCED WIRELESS — MAC FILTERING row. Another window with option to add MAC address will come.

Select the option Enable Access Control Mode and Click on Add button.

IF you get stuck somewhere  or you have an issue which you are not able to fix by yourself we would suggest you to take help of professionals to fix it .

Our D-Link technicians have many years of experience and possess top-notch knowledge about D-Link routers and all other D-Link networking products such that they can resolve almost all bugs through remote access technology.

                                  Call us now at our toll free number 

                            Australia:  

logon to our website:  

http://www.support-router.com/au/d-link-support/

Configure Your Dlink Modem Router Using Setup Wizard

  In this blog you will get detail how to configure your modem router for Internet and Wireless connection using the Setup Wizard accessible via a Web Browser.

D-Link note: running the Setup Wizard will reconfigure all your modem router settings.

Step 1. Open your Internet Browser and in the address field type in http://192.168.1.1

 Step 2. When prompted type in the Username and Password then click on the “Log In” button.  The factory settings are:

 Username: admin Password: admin

 If there is an error than you will need to reset the modem to factory defaults by pressing the reset button for 10 seconds. Please note that this will revert all the settings in the modem to factory settings and you will have to reconfigure it with your Internet settings and Wireless security. Make sure you have your Internet account details. D-Link Technical Support – Configuration using Web Browser

Or you can call our technical support team for it ( 1888 479 2017)

 Step 3. After logging in you will be presented with the modem’s configuration pages. Click on the Setup Wizard button:

Step 4. The Setup Wizard will display the steps required to configure your modem router. Click the Next button:

Step 5. Change the password that is used to access your modem router. Click the Next button. D-Link Technical Support – Configuration using Web Browser (Setup Wizard)

If you are facing any issue just take help of a professional technician for proper solutions.

 Step 6. Select your Time Zone. Click the Next button to continue:

 Step 7. Enter your Internet Provider details: select Country and your Internet Provider. If your provider is not listed, select “Other”: Providers in USA / Australia typically use these settings: Protocol: PPPoE; Connection Type: LLC; VPI: 8; VCI: 35 Providers in New Zealand typically use these settings: Protocol: PPPoA; Connection Type: VC-Mux; VPI: 0; VCI: 100 D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 5 of 6.

You can contact your internet service provider for details

 Step 8. Set your Internet connection. In the Username and Password field please type in your Internet account details as given by your Internet Service Provider. Click on the Next button.

 Step 9. Set the name for your wireless network. Type in names for both 2.4GHz and 5GHz Wi-Fi networks, something that you can easily identify.

Step 10. Set the level of security you want to use on your wireless network. It is recommended to select the “Best” option (WPA2). D-Link Technical Support – Configuration using Web Browser (Setup Wizard)

Step 11. Set the security password for both of your wireless networks. Take a note of this password as you will need to enter it into all your devices trying to connect to your Wi-Fi network for the first time. After you click on the Next button your modem router will apply the selected settings. Click on the Connect button. 

Your modem router’s Internet and Wireless configuration is now complete.

Step 12. IF still there are errors than easily you can fix it by taking help of experts for that you just have to call our Microsoft certificated technicians. Our certified experts aims at delivery quality and instant support assistance for D-link. The professionals won’t leave your issue in the middle; they are committed for delivering reliable solution to every technical problems a user comes across.

Call Us Now! 1800 987 893 (Toll-free)

or log on to:

https://www.icognix.net/technical-support-for-dlink/