How to reserve static IP address for your surveillance DVR ( D-link routers)

The Solution - Assign a Static IP Address, IP Reservation:

Your Dlink router can be configured to reserve and always assign a certain IP address to your DVR. This is known as a static IP address. Follow the below instructions to reserve static IP address for your surveillance DVR.

1. Open your D-Link router's control panel by going to the IP address http://192.168.0.1/ in a web browser. You will be prompt for a password. If you did not setup a password on your router, the dlink default password is blank. Enter admin for the username and leave the password blank
2. Afteryou are logged into your router, 1) click on the "Home" tab, then 2) click on the "DHCP" button. This will display the DHCP server screen as seen below: 
   
   
3. On the DHCP Server screen, use the screen shot below as a reference and:
   1. Locate the IP address of your DVR (you most likely previsouly noted this from a different set of instructions. If not, you can also identify your DVR by looking at the MAC address. In this example, our DVR is the one with the IP address ending in .104
   2. Choose the MAC address of your DVR from the DHCP client dropdown box and press the Clone button. This will populate the MAC Address and DHCP Client fields.
   3. Select the enabled radio button
   4. Choose a name for your DVR. This can be anything that you choose and is only used by you to indentify your DVR on the network while in the D-Link control panel.
   5. Press the Apply button.
      
      
4. After your router restarts and your screen refreshes, the static IP settings you made will be saved in the Status DHCP Client List as seen below.
   
   

That IP address is now permanently reserved for your IP camera or network DVR unless you remove that setting.

D-LINK TECH SUPPORT :

 We as an experienced team of D-Link support specialists provide even better services with issue fixing and solution providing to various problems without customers wasting their time by searching a shop outside.
Our D-Link technicians have many years of experience and possess top-notch knowledge about D-Link routers and all other D-Link networking products such that they can resolve almost all bugs through remote access technology.

CALL US AT OUR TOLL FREE NUMBER FOR AUSTRALIA:

1800987893.

YOU CAN VISIT OUR WEBSITE FOR MORE INFO:

http://www.support-router.com/au/d-link-support/

How to disable the Wireless on D-link DIR Series Router?

Steps to Disable the wireless on DIR series router by                   D-LINK TECH SUPPORT

Step 1: Open the browser type default IP address is 192.168.0.1. At the login, enter the username (admin) and your password (default password is blank).

Step 2: Click on the Setup tab at the top and then click  Wireless Settings on the left side.

Step 3: At the bottom of the page and Click Manual Wireless Network Setup

Step 4: Uncheck the Enable Wireless Option and Click Save Settings

Please Note-- If your router is Dual Band, you need to disable both the 2.4Ghz and 5Ghz wireless bands.

For more information or need any technical help please call our Dlink tech support team for that, Our team have experienced and microsoft certificated technicians, So call us at our toll free number :

USA 

1888 479 2017

Australia

 1800 987 893

Uk

 0800 820 3300

logon to our website for more info:

https://www.icognix.net/support-for-dlink-routers/

HOW TO UPDATE UNIFI D-LINK ROUTER FIRMWARE

1. Login as operator / Management  (Click here to refer on How To LogIn To UniFi D-Link UniFi Router)

Login to the D-Link router as operator

2. Click "MAINTENANCE" -> "Firmware Update"

Click "MAINTENANCE" tab

Click "Firmware Update" from left side

3. Click "Choose File" button -> Choose the firmware (Click here to get firmware)

Choose File by clicking the button

Choose Firmware

Firmware chosen is DIR615G2 (7.15 Firmware)

4. Click "Upload" button

Image with showing the upload percentage (97%)

5. Wait for the uploading to finish and wait until it restart by itself

Wait until it restart by itself

6. YOU ARE DONE!!

STILL YOU HAVE A PROBLEM ? THIS YOU NEED TECHNICAL HELP FROM D-LINK ROUTER EXPERT WHO FOX YOUR ISSUES . D-LINK ROUTER TECHNICAL SUPPORT TEAM IS MICROSOFT CERTIFICATED. YOU JUST NEED TO CALL OUR TOLL FREE NUM

AUSTRALIA : 1800 987 893

LOG ON TO OUR WEBSITE:  http://www.support-router.com/au/d-link-support/

Enable mac filtering on D-link Routers.

There might be many reasons which would make to enable MAC filtering in your Wi-Fi router. Situations like lot of users know your wifi password and you to do some important work for time being and the whole speed is distributed. Also, to get rid of hackers MAC filtering is much better option.This guide is based on D-link DSL 2750U router but it will work with all the D-link routers having Firmware Version:IN_1.02. Also, even if the firmwares are different the steps are probably more less same.

This is how you can enable mac filtering on dlink Router

First of all make sure you are connected to your router either wirelessly or through LAN (Local area Network).
1. Enter 192.168.1.1 in your browser URL. A window will open asking username and password.

Mostly, the default username is admin and password is also admin. If you have not changed it just enter admin in the password but if you changed it then enter the one you have changed.
Learn: How to Change Dlink default admin password? call at 1800 987 893

2. After entering the password click on Login and new window will open.

Click on the Advanced Tab. Another window with option of MAC filtering will come.

3. Click on Mac Filtering button under ADVANCED WIRELESS — MAC FILTERING row. Another window with option to add MAC address will come.

Select the option Enable Access Control Mode and Click on Add button.

IF you get stuck somewhere  or you have an issue which you are not able to fix by yourself we would suggest you to take help of professionals to fix it .

Our D-Link technicians have many years of experience and possess top-notch knowledge about D-Link routers and all other D-Link networking products such that they can resolve almost all bugs through remote access technology.

                                  Call us now at our toll free number 

                            Australia:  

logon to our website:  

http://www.support-router.com/au/d-link-support/

What you can Do if You Forget Your Network Passwords for D-link router

Resetting your D-Link® router’s Wi-Fi password is easy:

• Type your router’s IP address —192.168.0.1— into your Web browser.
• At the login screen, select “Admin” from the drop down menu and enter your admin password.
• Once you access the Web configuration screen, click “Setup” in the top menu.
• Select the “Wireless Settings” link on the left-hand side.
• From there, click on the “Manual Wireless Connection Setup” button.
• Scroll down to the field representing my “Pre-Shared Key”. If you don’t see it, select a security mode from the dropdown menu at the bottom of the screen first.
• Type in a new password. (I use a hybrid WPA/WPA2 security mode.)
• 
  

That’s it! Now for the more challenging of the two: the forgotten admin password.

The Forgotten Admin Password

If you forget your Web configuration password, you’re stuck: you have no way to change any settings on your router. Your only recourse is to use a paperclip or other pointy object to reset your router to its factory settings. With the
paperclip, hold down the tiny reset button on the back of your router for about five seconds. Your router lights will blink to confirm the factory reset. You can now use the router’s default password to log into its Web configuration screen (look in your router manual if you can’t remember what this is). Once you’re in, be sure to change this password to something unique. (To ensure a strong password, try Strong Password Generator.)

We all forget passwords. But with a little prep work, your router will be ready to rebound when you have a memory slip.

If you are not able to reset the password you can call at our toll free number 1800 897 983.

Our D-Link Support solution’s tech team provides real time results supporting all D-Link networking devices.

log on to our website to know more:

http://www.support-router.com/au/d-link-support/

Configure Your Dlink Modem Router Using Setup Wizard

  In this blog you will get detail how to configure your modem router for Internet and Wireless connection using the Setup Wizard accessible via a Web Browser.

D-Link note: running the Setup Wizard will reconfigure all your modem router settings.

Step 1. Open your Internet Browser and in the address field type in http://192.168.1.1

 Step 2. When prompted type in the Username and Password then click on the “Log In” button.  The factory settings are:

 Username: admin Password: admin

 If there is an error than you will need to reset the modem to factory defaults by pressing the reset button for 10 seconds. Please note that this will revert all the settings in the modem to factory settings and you will have to reconfigure it with your Internet settings and Wireless security. Make sure you have your Internet account details. D-Link Technical Support – Configuration using Web Browser

Or you can call our technical support team for it ( 1888 479 2017)

 Step 3. After logging in you will be presented with the modem’s configuration pages. Click on the Setup Wizard button:

Step 4. The Setup Wizard will display the steps required to configure your modem router. Click the Next button:

Step 5. Change the password that is used to access your modem router. Click the Next button. D-Link Technical Support – Configuration using Web Browser (Setup Wizard)

If you are facing any issue just take help of a professional technician for proper solutions.

 Step 6. Select your Time Zone. Click the Next button to continue:

 Step 7. Enter your Internet Provider details: select Country and your Internet Provider. If your provider is not listed, select “Other”: Providers in USA / Australia typically use these settings: Protocol: PPPoE; Connection Type: LLC; VPI: 8; VCI: 35 Providers in New Zealand typically use these settings: Protocol: PPPoA; Connection Type: VC-Mux; VPI: 0; VCI: 100 D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 5 of 6.

You can contact your internet service provider for details

 Step 8. Set your Internet connection. In the Username and Password field please type in your Internet account details as given by your Internet Service Provider. Click on the Next button.

 Step 9. Set the name for your wireless network. Type in names for both 2.4GHz and 5GHz Wi-Fi networks, something that you can easily identify.

Step 10. Set the level of security you want to use on your wireless network. It is recommended to select the “Best” option (WPA2). D-Link Technical Support – Configuration using Web Browser (Setup Wizard)

Step 11. Set the security password for both of your wireless networks. Take a note of this password as you will need to enter it into all your devices trying to connect to your Wi-Fi network for the first time. After you click on the Next button your modem router will apply the selected settings. Click on the Connect button. 

Your modem router’s Internet and Wireless configuration is now complete.

Step 12. IF still there are errors than easily you can fix it by taking help of experts for that you just have to call our Microsoft certificated technicians. Our certified experts aims at delivery quality and instant support assistance for D-link. The professionals won’t leave your issue in the middle; they are committed for delivering reliable solution to every technical problems a user comes across.

Call Us Now! 1800 987 893 (Toll-free)

or log on to:

https://www.icognix.net/technical-support-for-dlink/

10 Steps to troubleshoot your D-link router

Wireless signals aren't perfect, however, and you may notice a loss of signal strength to any of your computers due to a variety of factors. Depending on whether the problem is caused by physical interference or a software issue, several troubleshooting options are available.

THINGS YOU'LL NEED

STEP 1

Remove the D-Link router from its current position if it is placed inside an enclosed space, such as a cabinet. Set the D-Link in a centralized location closer to your computer and see if the wireless connection becomes more stable.

STEP 2

Unplug or power off any 2.4 GHz cordless phones or Bluetooth devices currently active near the network because they can interfere with the wireless signal coming from the router. Locate the small reset hole on the back end of the router if the problem persists. The hole is positioned to the left of the power cable.

STEP 3

Unfold a paper clip and insert the edge of the clip into the reset hole to press the reset button. Hold the clip in place for 10 seconds to reset all of the D-Link router's options to the default factory condition.

STEP 4

Open a Web browser and navigate to the address "192.168.0.1" to open the D-Link's setup page. Type "admin" in the User Name field and click "OK." Leave the Password field blank.

STEP 5

Click the "Setup Wizard" icon. Select the "Launch Internet Connection Setup Wizard" option. Click "Next" and type a new password for your router in the text box. Click "Next" again.

STEP 6

Follow the prompts on the screen to select your time zone and type of high-speed Internet connection. Click "Next" and "OK." Navigate to the D-Link support Web page.

STEP 7

Click "See All Products" and select the link for your wireless router's model. Click "Support Resources" and "Firmware." Select the "Download Now" link next to the most recent firmware version available.

STEP 8

Navigate back to the router's menu by accessing the Web address "192.168.0.1." Type "admin" for the username and type your new password in the Password field. Click "OK."

STEP 9

Click "Tools" and "Firmware." Click "Browse" and choose the name of the firmware file you downloaded. Click "Open." Choose "Save Settings" to upgrade the wireless router's firmware.

STEP 10

Right-click the network icon in the lower-right end of your screen and click the name of your D-Link router to connect to the network.

Note: Still the problem occurs you can call us our Microsoft certificated team will fix it for you. Australia Router Support ( ARS ) Inc.’s D-Link technicians are available for 24*7*365. Whenever a D-Link user needs a technical guidance, they get in touch with our D-Link Support service team. Our D-Link Support technicians are available through out  live chats, emails or over the phone. 

call us at our toll free number 

Australia: 1800 987 893

UK : 0800 820 3300 

or 

log on to : http://www.support-router.com/au/d-link-support/