HOW TO UPDATE UNIFI D-LINK ROUTER FIRMWARE

1. Login as operator / Management  (Click here to refer on How To LogIn To UniFi D-Link UniFi Router)

Login to the D-Link router as operator

2. Click "MAINTENANCE" -> "Firmware Update"

Click "MAINTENANCE" tab

Click "Firmware Update" from left side

3. Click "Choose File" button -> Choose the firmware (Click here to get firmware)

Choose File by clicking the button

Choose Firmware

Firmware chosen is DIR615G2 (7.15 Firmware)

4. Click "Upload" button

Image with showing the upload percentage (97%)

5. Wait for the uploading to finish and wait until it restart by itself

Wait until it restart by itself

6. YOU ARE DONE!!

STILL YOU HAVE A PROBLEM ? THIS YOU NEED TECHNICAL HELP FROM D-LINK ROUTER EXPERT WHO FOX YOUR ISSUES . D-LINK ROUTER TECHNICAL SUPPORT TEAM IS MICROSOFT CERTIFICATED. YOU JUST NEED TO CALL OUR TOLL FREE NUM

AUSTRALIA : 1800 987 893

LOG ON TO OUR WEBSITE:  http://www.support-router.com/au/d-link-support/

Enable mac filtering on D-link Routers.

There might be many reasons which would make to enable MAC filtering in your Wi-Fi router. Situations like lot of users know your wifi password and you to do some important work for time being and the whole speed is distributed. Also, to get rid of hackers MAC filtering is much better option.This guide is based on D-link DSL 2750U router but it will work with all the D-link routers having Firmware Version:IN_1.02. Also, even if the firmwares are different the steps are probably more less same.

This is how you can enable mac filtering on dlink Router

First of all make sure you are connected to your router either wirelessly or through LAN (Local area Network).
1. Enter 192.168.1.1 in your browser URL. A window will open asking username and password.

Mostly, the default username is admin and password is also admin. If you have not changed it just enter admin in the password but if you changed it then enter the one you have changed.
Learn: How to Change Dlink default admin password? call at 1800 987 893

2. After entering the password click on Login and new window will open.

Click on the Advanced Tab. Another window with option of MAC filtering will come.

3. Click on Mac Filtering button under ADVANCED WIRELESS — MAC FILTERING row. Another window with option to add MAC address will come.

Select the option Enable Access Control Mode and Click on Add button.

IF you get stuck somewhere  or you have an issue which you are not able to fix by yourself we would suggest you to take help of professionals to fix it .

Our D-Link technicians have many years of experience and possess top-notch knowledge about D-Link routers and all other D-Link networking products such that they can resolve almost all bugs through remote access technology.

                                  Call us now at our toll free number 

                            Australia:  

logon to our website:  

http://www.support-router.com/au/d-link-support/

Configure VPN on D-Link Router Manually

How to Configure VPN on D-Link Router Manually

Before you begin, please make sure that:

·        You have a working internet connection

1.       Go to setup:

·        Click on Internet tab on left hand navigation

·        Click on Manual Internet Connection setup

2. From “My internet connection is” select ” PPTP(Username/Password) “

Under PPTP Internet Connection TYPE section.

       ·        Select Address Mode” Dynamic “

·        Enter your Ivacy desired server address into Server IP address field. ·

         Enter your Ivacy credential“Email & Password” you registered with Ivacy

·        Click on “Save Settings”

·        VPN Connection will establish in few seconds.

If you face any issue in Ivacy VPN connection setup, then please feel free to contact our Customer Support Team at 1800 987 893 for Australia or you can log on to our website http://www.support-router.com/au/d-link-support/ for any further assistance.

Whenever a D-Link user needs a technical guidance, they get in touch with our D-Link Support service team. Our D-Link Support technicians are available through out  live chats, emails or over the phone. More important, Australia Router Support ( ARS ) Inc.’s D-Link Support teams are located in most populated IT hubs of Australia like Melbourne , Brisbane , Perth , Adelaide , Sydney etc where use of D-Link Networking devices and Wireless Routers is high .

Toll free number for Australia: 

1800 987 893

Configure Your Dlink Modem Router Using Setup Wizard

  In this blog you will get detail how to configure your modem router for Internet and Wireless connection using the Setup Wizard accessible via a Web Browser.

D-Link note: running the Setup Wizard will reconfigure all your modem router settings.

Step 1. Open your Internet Browser and in the address field type in http://192.168.1.1

 Step 2. When prompted type in the Username and Password then click on the “Log In” button.  The factory settings are:

 Username: admin Password: admin

 If there is an error than you will need to reset the modem to factory defaults by pressing the reset button for 10 seconds. Please note that this will revert all the settings in the modem to factory settings and you will have to reconfigure it with your Internet settings and Wireless security. Make sure you have your Internet account details. D-Link Technical Support – Configuration using Web Browser

Or you can call our technical support team for it ( 1888 479 2017)

 Step 3. After logging in you will be presented with the modem’s configuration pages. Click on the Setup Wizard button:

Step 4. The Setup Wizard will display the steps required to configure your modem router. Click the Next button:

Step 5. Change the password that is used to access your modem router. Click the Next button. D-Link Technical Support – Configuration using Web Browser (Setup Wizard)

If you are facing any issue just take help of a professional technician for proper solutions.

 Step 6. Select your Time Zone. Click the Next button to continue:

 Step 7. Enter your Internet Provider details: select Country and your Internet Provider. If your provider is not listed, select “Other”: Providers in USA / Australia typically use these settings: Protocol: PPPoE; Connection Type: LLC; VPI: 8; VCI: 35 Providers in New Zealand typically use these settings: Protocol: PPPoA; Connection Type: VC-Mux; VPI: 0; VCI: 100 D-Link Technical Support – Configuration using Web Browser (Setup Wizard) Page 5 of 6.

You can contact your internet service provider for details

 Step 8. Set your Internet connection. In the Username and Password field please type in your Internet account details as given by your Internet Service Provider. Click on the Next button.

 Step 9. Set the name for your wireless network. Type in names for both 2.4GHz and 5GHz Wi-Fi networks, something that you can easily identify.

Step 10. Set the level of security you want to use on your wireless network. It is recommended to select the “Best” option (WPA2). D-Link Technical Support – Configuration using Web Browser (Setup Wizard)

Step 11. Set the security password for both of your wireless networks. Take a note of this password as you will need to enter it into all your devices trying to connect to your Wi-Fi network for the first time. After you click on the Next button your modem router will apply the selected settings. Click on the Connect button. 

Your modem router’s Internet and Wireless configuration is now complete.

Step 12. IF still there are errors than easily you can fix it by taking help of experts for that you just have to call our Microsoft certificated technicians. Our certified experts aims at delivery quality and instant support assistance for D-link. The professionals won’t leave your issue in the middle; they are committed for delivering reliable solution to every technical problems a user comes across.

Call Us Now! 1800 987 893 (Toll-free)

or log on to:

https://www.icognix.net/technical-support-for-dlink/