How to reserve static IP address for your surveillance DVR ( D-link routers)

The Solution - Assign a Static IP Address, IP Reservation:

Your Dlink router can be configured to reserve and always assign a certain IP address to your DVR. This is known as a static IP address. Follow the below instructions to reserve static IP address for your surveillance DVR.

1. Open your D-Link router's control panel by going to the IP address http://192.168.0.1/ in a web browser. You will be prompt for a password. If you did not setup a password on your router, the dlink default password is blank. Enter admin for the username and leave the password blank
2. Afteryou are logged into your router, 1) click on the "Home" tab, then 2) click on the "DHCP" button. This will display the DHCP server screen as seen below: 
   
   
3. On the DHCP Server screen, use the screen shot below as a reference and:
   1. Locate the IP address of your DVR (you most likely previsouly noted this from a different set of instructions. If not, you can also identify your DVR by looking at the MAC address. In this example, our DVR is the one with the IP address ending in .104
   2. Choose the MAC address of your DVR from the DHCP client dropdown box and press the Clone button. This will populate the MAC Address and DHCP Client fields.
   3. Select the enabled radio button
   4. Choose a name for your DVR. This can be anything that you choose and is only used by you to indentify your DVR on the network while in the D-Link control panel.
   5. Press the Apply button.
      
      
4. After your router restarts and your screen refreshes, the static IP settings you made will be saved in the Status DHCP Client List as seen below.
   
   

That IP address is now permanently reserved for your IP camera or network DVR unless you remove that setting.

D-LINK TECH SUPPORT :

 We as an experienced team of D-Link support specialists provide even better services with issue fixing and solution providing to various problems without customers wasting their time by searching a shop outside.
Our D-Link technicians have many years of experience and possess top-notch knowledge about D-Link routers and all other D-Link networking products such that they can resolve almost all bugs through remote access technology.

CALL US AT OUR TOLL FREE NUMBER FOR AUSTRALIA:

1800987893.

YOU CAN VISIT OUR WEBSITE FOR MORE INFO:

http://www.support-router.com/au/d-link-support/

Changing the IP Address on a Dlink DIR-655 router

Login To The Dlink DIR-655

To get started configuring the Dlink DIR-655 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink DIR-655, follow our Dlink DIR-655 Login Guide.

Change the LAN IP Address on a Dlink DIR-655

If you followed our login guide above then you should see this screen.

When you have logged into the Dlink DIR-655 you see the Setup page. When changing the IP Address, the local address you are looking at while inside the network, click the blue box, on the left labeled Network Settings.

Configure the LAN section of your Dlink DIR-655

This places you on a new page. Scroll down to the heading Router Settings, and click the box labeled Router IP Address. Enter the address you have chosen for your Router here. In this screenshot, it shows the address of 192.168.0.1, we recommend you use this also.

The Subnet Mask should almost always stay at 255.255.255.0, the DHCP Server should also almost always be enabled.

When you are finished, save your changes by clicking Save Settings, this is near the top.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

you might get some issues while setting up manually . so we would recommend you to get technical support from our experienced team .

Whenever a D-Link user needs a technical guidance, they get in touch with our D-Link Support service team. Our D-Link Support technicians are available through out  live chats, emails or over the phone

Call now for Australia toll free number :                        1800 987 893

USA :    18888 479 2017

website address: http://www.support-router.com/au/d-link-support/  

Configure VPN on D-Link Router Manually

How to Configure VPN on D-Link Router Manually

Before you begin, please make sure that:

·        You have a working internet connection

1.       Go to setup:

·        Click on Internet tab on left hand navigation

·        Click on Manual Internet Connection setup

2. From “My internet connection is” select ” PPTP(Username/Password) “

Under PPTP Internet Connection TYPE section.

       ·        Select Address Mode” Dynamic “

·        Enter your Ivacy desired server address into Server IP address field. ·

         Enter your Ivacy credential“Email & Password” you registered with Ivacy

·        Click on “Save Settings”

·        VPN Connection will establish in few seconds.

If you face any issue in Ivacy VPN connection setup, then please feel free to contact our Customer Support Team at 1800 987 893 for Australia or you can log on to our website http://www.support-router.com/au/d-link-support/ for any further assistance.

Whenever a D-Link user needs a technical guidance, they get in touch with our D-Link Support service team. Our D-Link Support technicians are available through out  live chats, emails or over the phone. More important, Australia Router Support ( ARS ) Inc.’s D-Link Support teams are located in most populated IT hubs of Australia like Melbourne , Brisbane , Perth , Adelaide , Sydney etc where use of D-Link Networking devices and Wireless Routers is high .

Toll free number for Australia: 

1800 987 893